1) DO NOT hand wash for 3 days after application of Graphics or Vinly Lettering to allow time for adhesive to cure.DO NOT machine or spray wash the car for 7 days after after application of Vinyl Lettering or Graphics

2) DO NOT wax the surface where Graphics or Lettering was placed.

3) DO FOLLOW CLEANING INSTRUCTIONS BELOW!

     1) Use a cleaner which is non-abrasive, niether strogly acidic or alkaline, and free of alcohol solvents

      2) Flush the Graphic's &/or Vinyl Lettering surface with water to remove loose dirt and debris.

      3) Wash the marking with a rag or sponge using a detergent which complies with step one. Avoid abrading the surface by unnecessary scrubbing. Once suds have been applied, rince with steady stream of water.

      4) If using a pressure washer, the nozzle must be at least 12" away from and perpendicular to the marking. Pressure must NOT exceed 1500 psi and water temperture must NOT exceed dedrees F. DO NOT  direct the water stream at the edge of the marking or edge lifting will occur.

      5) Use of automatic car washed with rotating brushes is NOT advised unless the brushes are cloth. NYLON BRUSHES WILL DAMAGE THE GRAPHICS OR VINYL LETTERING.

        6) If tar, oil, diesel smut bituminous material remains, wipe with a rag dampended with kerosene, mineral pririts, heptane or VM&P Naptha. DO NOT use other solvents. Wash again with detergent and water. Rinse with clean water.