CLEAN THE SURFACE:

Wipe area with a clean dry cloth to clean the area. The wipe down the area with denatured alcohol to remove any residue, wax, or grease. 

SECURE WITH TAPE

Use masking tape to attach the vinyl graphic where you want it and measure to ensure that it is correctly positioned. 

SET UP HINGE

Once you are happy with the placement of the vinyl graphic. Apply a piece of masking tape     across the top of the graphic, attaching it to the surface. 

REMOVE THE BACKING PAPER OF THE GRAPHIC

The Tape across the top acts like a hinge, flip up the graphic and pull away the backing paper carefully from the transfer tape. Then flip down the vinyl graphic into  position. 

APPLY THE VINYL GRAPHIC TO THE SURFACE

With the vinyl graphic in position, apply pressure with a squeegee or a credit card. Start in the middle and work up and down from the center out to the edges. Use even force to ensure the air is pushed out from behind the graphic. 

REOMVE THE TRANSFER TAPE FROM THE GRAPHIC

Peel away the transfer tape and masking tape from the top of the graphic at a 45 degree angel down. Do this slowly. If there is any air bubbles take a pin and insert into the bubble and with the squeegee or credit card force the air out.